Dehumidifying Dryer
All-in-one dehumidifier, dryer and loader (Save Energy Type)
Matsui has developed the “ iplas ” series, equipment with “ i ”, for
intelligence, built-in. MJ5-i autonomously determines operating
conditions and constantly maintains the optimal drying conditions
without any intervention by the operator.
1. A maximum energy reduction of 75% has been achieved!
Conventional equipment consumes the same amount of electricity, regardless of the size of the drying load. MJ5-i has achieved energy reduction by using only the most appropriate amount of electricity according to the size of the drying load.
2. Contributes to electricity conservation!
Since MJ5-i has a low exhaust gas temperature, air conditioning load is reduced, leading to further saving of electricity.
3. Shorter material replacement time!
By reducing the cleaning work during material replacement, a shorter time required for replacement is possible.
4. No more filter maintenance!
Load on the filter has been reduced by the standard installation of a cyclone vacuum type filter, greatly decreasing the frequency of filter maintenance.
5. Easy operation
The touch panel is easy to use.
Standard Specification
Model | Unit | MJ5-i-150A | MJ5-i-350A | MJ5-i-650A | MJ5-i-1500A | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Power Supply | Voltage | V | AC200/380V, 50Hz, 3 Phase | ||||||||
Operation Circuit Voltage | V | AC100V, DC24V | |||||||||
Apparent Power | kVA | 6.8 | 8.5 | 13.9 | 27.2 | ||||||
Breaker Capacity | A | 30/15 | 30/15 | 50/30 | 100/63 | ||||||
Air Supply | Pressure | MPa | 0.5 | ||||||||
Flow Rate | L/h | 10 | 20 | ||||||||
Diameter | mm | Ø 6 | |||||||||
Operating Temperature | ºC | 60~160 | 70~160 | ||||||||
Ambient Condition : Temperature 10ºC~35ºC | |||||||||||
Dew-point ※ | ºC | -40 ~ -60 (minimum) | |||||||||
Hopper Volume | L | 50 | 100 | 200 | 500 | ||||||
Drying | Heater | Capacity | kW | 2.1 | 2.4 | 5.4 | 10.8 | ||||
Blower | Output | kW | 0.28 | 0.42 | 1.15 | 2.55 | |||||
Conveying Blower | Output | kW | 1.1 | 2.55 | |||||||
Regeneration | Blower | Output | kW | 0.28 | 0.28 | 0.42 | 1.15 | ||||
Heater | Capacity | kW | 1 | 2.1 | 3.1 | 5.8 | |||||
Outer Dimension | W | mm | 1,125 | 1,191 | 1,486 | 1,910 | |||||
D | mm | 618 | 618 | 638 | 914 | ||||||
H3 | mm | 2,117 | 2,203 | 2,509 | 2,689 | ||||||
Product Weight | kg | 270 | 290 | 400 | 690 |
※ Ambient Condition: Temperature 30ºC Relative Humidity 75% (DP+25ºC) Air Inflow: 10%
When it falls below the above conditions, the minimum dew point (-60ºC) could be obtained.
Options
• Low level alarm
• Knob setting filter
• Rotation motor alarm
• Drying complete alarm
• Magnet
• Digi pega setting
• Control AC100V
• TSV setting
• Alarm indicator
• General alarm signal
• Weekly timer
• Watt meter
• Earth leakage breaker
• Power off delay timer
• 3-Direction material